8.9 | Analyzing source code | Scanners | SonarScanner for Gradle

On this page

SonarScanner for Gradle

The SonarScanner for Gradle provides an easy way to start SonarQube analysis of a Gradle project.

The ability to execute the SonarQube analysis via a regular Gradle task makes it available anywhere Gradle is available (developer build, CI server, etc.), without the need to manually download, setup, and maintain a SonarQube Runner installation. The Gradle build already has much of the information needed for SonarQube to successfully analyze a project. By preconfiguring the analysis based on that information, the need for manual configuration is reduced significantly.

Prerequisites

  • Gradle versions 5+
  • At least the minimal version of Java supported by your SonarQube server is in use

Bytecode created by javac compilation is required for Java analysis, including Android projects.

Configure the scanner

Installation is automatic, but certain global properties should still be configured. A good place to configure global properties is ~/.gradle/gradle.properties. Be aware that the scanner uses system properties so all properties should be prefixed by systemProp.

# gradle.properties
systemProp.sonar.host.url=http://localhost:9000

Analyzing

First, include the scanner in your build in build.gradle:

 plugins {
  id "org.sonarqube" version "3.2.0"
}

More details on Gradle - Plugin: org.sonarqube

Assuming a local SonarQube server with out-of-the-box settings is up and running, no further configuration is required.

You need to pass an authentication token using the sonar.login property in your command line or configure it as part of your gradle.properties file. Execute gradle sonar -Dsonar.login=yourAuthenticationToken and wait until the build has completed. Once passing your token and running an analysis, open the web page indicated at the bottom of the console output. Your analysis results should be available shortly after the CI-side analysis is complete.

Analyzing multi-project builds

To analyze a project hierarchy, apply the SonarQube plugin to the root project of the hierarchy. Typically (but not necessarily) this will be the root project of the Gradle build. Information pertaining to the analysis as a whole has to be configured in the sonarqube block of this project. Any properties set on the command line also apply to this project.

A configuration shared between subprojects can be configured in a subprojects block.

// build.gradle
subprojects {
    sonarqube {
        properties {
            property "sonar.sources", "src"
        }
    }
}

Project-specific information is configured in the sonarqube block of the corresponding project.

// build.gradle
project(":project1") {
    sonarqube {
        properties {
            property "sonar.branch", "Foo"
        }
    }}

To skip SonarQube analysis for a particular subproject, set sonarqube.skipProject to true.

// build.gradle
project(":project2") {
    sonarqube {
        isSkipProject = true
    }
}

Task dependencies

All tasks that produce output that should be included in the SonarQube analysis need to be executed before the sonarqube task runs. Typically, these are compile tasks, test tasks, and code coverage tasks.

Starting with v3.0 of the SonarScanner for Gradle, task dependencies are no longer added automatically. Instead, the SonarScanner plugin enforces the correct order of tasks with mustRunAfter. You need to be either manually run the tasks that produce output before sonarqube, or you can add a dependency to the build script:

// build.gradle
project.tasks["sonarqube"].dependsOn "anotherTask"

Sample project

A simple working example is available at this URL so you can check everything is correctly configured in your env:
https://github.com/SonarSource/sonar-scanning-examples/tree/master/sonar-scanner-gradle/gradle-basic

Analysis property defaults

The SonarScanner for Gradle uses information contained in Gradle's object model to provide smart defaults for most of the standard analysis parameters, as listed below.

Gradle defaults for standard SonarQube properties:

PropertyGradle default
sonar.projectKey[${project.group}:]${project.name} for root module; <root module key>:<module path> for submodules
sonar.projectName${project.name}
sonar.projectDescription${project.description}
sonar.projectVersion${project.version}
sonar.projectBaseDir${project.projectDir}
sonar.projectBaseDir${project.buildDir}/sonar

Notice that additional defaults are provided for projects that have the java-base or java plugin applied:

PropertyGradle default
sonar.sourceEncoding${project.compileJava.options.encoding}
sonar.java.source${project.targetCompatibility}
sonar.java.target${project.targetCompatibility}
sonar.sources${sourceSets.main.allJava.srcDirs} (filtered to only include existing directories)
sonar.tests${sourceSets.test.allJava.srcDirs} (filtered to only include existing directories)
sonar.java.binaries${sourceSets.main.output.classesDir}
sonar.java.libraries${sourceSets.main.compileClasspath} (filtering to only include files; rt.jar and jfxrt.jar added if necessary)
sonar.java.test.binaries${sourceSets.test.output.classesDir}
sonar.java.test.libraries${sourceSets.test.compileClasspath} (filtering to only include files; rt.jar and jfxrt.jar added if necessary)
sonar.junit.reportPaths${test.testResultsDir} (if the directory exists)

Groovy projects get all the Java defaults, plus:

PropertyGradle default
sonar.groovy.binaries${sourceSets.main.output.classesDir}

Additional defaults when JaCoCo plugin is applied

PropertyGradle default
sonar.jacoco.reportPaths${jacoco.destinationFile}
sonar.groovy.jacoco.reportPath${jacoco.destinationFile}

Additional defaults for Android projects (com.android.applicationcom.android.library, or com.android.test) By default the first variant of type debug will be used to configure the analysis. You can override the name of the variant to be used using the parameter androidVariant:

build.gradle
sonarqube {
    androidVariant 'fullDebug'
}
PropertyGradle default
sonar.sources (for non test variants)${variant.sourcesets.map} (ManifestFile/CDirectories/AidlDirectories/AssetsDirectories/CppDirectories/JavaDirectories/RenderscriptDirectories/ResDirectories/ResourcesDirectories)
sonar.tests (for test variants)${variant.sourcesets.map} (ManifestFile/CDirectories/AidlDirectories/AssetsDirectories/CppDirectories/JavaDirectories/RenderscriptDirectories/ResDirectories/ResourcesDirectories)
sonar.java[.test].binaries${variant.destinationDir}
sonar.java[.test].libraries${variant.javaCompile.classpath} + ${bootclasspath}
sonar.java.source${variant.javaCompile.sourceCompatibility}
sonar.java.target${variant.javaCompile.targetCompatibility}

Passing manual properties / overriding defaults

The SonarScanner for Gradle adds a SonarQubeExtension extension to the project and its subprojects, which allows you to configure/override the analysis properties.

// in build.gradle
sonarqube {
    properties {
        property "sonar.exclusions", "**/*Generated.java"
    }
}

SonarQube properties can also be set from the command line, or by setting a system property named exactly like the SonarQube property in question. This can be useful when dealing with sensitive information (e.g. credentials), environment information, or for ad-hoc configuration.

gradle sonarqube -Dsonar.host.url=http://sonar.mycompany.com -Dsonar.verbose=true

While certainly useful at times, we recommend keeping the bulk of the configuration in a (versioned) build script, readily available to everyone. A SonarQube property value set via a system property overrides any value set in a build script (for the same property). When analyzing a project hierarchy, values set via system properties apply to the root project of the analyzed hierarchy. Each system property starting with sonar. will be taken into account.

Analyzing custom source sets

By default, the SonarScanner for Gradle passes on the project's main source set as production sources, and the project's test source set as test sources. This works regardless of the project's source directory layout. Additional source sets can be added as needed.

Advanced topics

More on configuring SonarQube properties

Let's take a closer look at the sonarqube.properties block. As we have already seen in the examples, the property method allows you to set new properties or override existing ones. Furthermore, all properties that have been configured up to this point, including all properties preconfigured by Gradle, are available via the properties accessor.

Entries in the properties map can be read and written with the usual Groovy syntax. To facilitate their manipulation, values still have their “idiomatic” type (File, List, etc.). After the sonarProperties block has been evaluated, values are converted to Strings as follows: Collection values are (recursively) converted to comma-separated Strings, and all other values are converted by calling their toString methods.

Because the sonarProperties block is evaluated lazily, properties of Gradle's object model can be safely referenced from within the block, without having to fear that they have not yet been set.

© 2008-2024 SonarSource SA. All rights reserved. SONAR, SONARSOURCE, SONARLINT, SONARQUBE, SONARCLOUD, and CLEAN AS YOU CODE are trademarks of SonarSource SA.

Creative Commons License