Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 6 Next »

Table of Contents

Prerequisites

  • Running instances of Hudson and Sonar
  • Sonar Hudson plugin installed on Hudson

Configuring the Sonar Hudson Plugin

Adding Sonar Server

You can define as many Sonar servers as you wish. Then for each Hudson job, you will be able to choose on which server to run the Sonar analysis.

To add a Sonar server, just follow the three steps below:

1. Log into Hudson as an administrator and go to Manage Hudson > Configure System: 



2. Scroll down to the 'Sonar' configuration section and click on 'Add Sonar':


3. Configure your Sonar installation:

Adding Sonar Runner

This step is mandatory if you want to trigger your Sonar analyses with the Sonar Runner. Skip this step if you want to trigger your analyses with Maven.

You can define as many Sonar Runner launchers as you wish. Then for each Hudson job, you will be able to choose with which launcher to run the Sonar analysis.

To add a Sonar Runner, just follow the three steps below:

1. Log into Hudson as an administrator and go to Manage Hudson > Configure System: 



2. Scroll down to the 'Sonar Runner' configuration section and click on 'Add Sonar Runner'. It is based on the typical Hudson tool auto-installation. You can either choose to point to an already installed version of Sonar Runner (uncheck 'Install automatically') or tell Hudson to grab the installer from a remote location (check 'Install automatically'):


  • No labels